View PS7122A-1C_150453.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
Solid State Relay OCMOS FET
PS7122A-1C,PS7122AL-1C
8-PIN DIP, 250 V BREAK DOWN VOLTAGE, TRANSFER TYPE 2-ch Optical Coupled MOS FET
DESCRIPTION
The PS7122A-1C and PS7122AL-1C are transfer type solid state relays containing normally open (N.O.) contact and normally close (N.C.) contact on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7122AL-1C has a surface mount type lead.
FEATURES
* 2 channel type (1 a + 1 b output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (8-pin DIP) * Low offset voltage * PS7122AL-1C: Surface mount type
APPLICATIONS
* Exchange equipment * Measurement equipment * FA/OA equipment
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P13383EJ4V0DS00 (4th edition) Date Published October 1999 NS CP(K) Printed in Japan
The mark * shows major revised points.
(c)
1997, 1999
PS7122A-1C,PS7122AL-1C
PACKAGE DIMENSIONS (in millimeters)
PS7122A-1C
9.250.5 8 7
TOP VIEW
6 5 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET (N.O.) 6. MOS FET (N.O.) 7. MOS FET (N.C.) 8. MOS FET (N.C.)
1
2
3
4
7.62 6.50.5
4.150.3 3.30.3 3.50.3
0.50.1 1.340.1 0.25 M
0 to 15 2.54
PS7122AL-1C
9.250.5 8 7
TOP VIEW
6 5 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET (N.O.) 6. MOS FET (N.O.) 7. MOS FET (N.C.) 8. MOS FET (N.C.)
1
2
3
4
6.50.5
3.50.3 0.10+0.10 -0.05
1.340.1 0.25 M
2.54
0.90.25 9.600.4
2
Data Sheet P13383EJ4V0DS00
PS7122A-1C,PS7122AL-1C
ORDERING INFORMATION
Part Number PS7122A-1C PS7122AL-1C PS7122AL-1C-E3 PS7122AL-1C-E4 Embossed Tape 1 000 pcs/reel Package 8-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7122A-1C PS7122AL-1C
*1
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current Pulse Load Current
*2 *1
Symbol IF VR PD IFP VL IL ILP
Ratings 50 5.0 50 1 250 200 400
Unit mA V mW/ch A V mA mA
(AC/DC Connection) Power Dissipation Isolation Voltage
*3
PD BV PT TA Tstg
375 1 500 850 -40 to +80 -40 to +100
mW/ch Vr.m.s. mW C C
Total Power Dissipation Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output
RECOMMENDED OPERATING CONDITIONS (TA = 25 C)
Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V
Data Sheet P13383EJ4V0DS00
3
PS7122A-1C,PS7122AL-1C
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Diode Forward Voltage Reverse Current
MOS FET Off-state Leakage Current
Symbol VF IR ILoff IF = 10 mA VR = 5 V
Conditions
MIN.
TYP. 1.2
MAX. 1.4 5.0
Unit V
A A
N.O.: IF = 0 mA, VD = 250 V N.C.: IF = 10 mA, VD = 250 V
0.03
1.0
Output Capacitance
Cout
N.O.: VD = 0 V, f = 1 MHz N.C.: IF = 10 mA, VD = 0 V, f = 1 MHz
120 340 2.0 2.0 4.5 8.0
pF/ch
Coupled
LED On-state Current LED Off-state Current On-state Resistance
IFon IFoff Ron1
N.O.: IL = 200 mA N.C.: IL = 200 mA N.O.: IF = 10 mA, IL = 10 mA N.C.: IF = 0 mA, IL = 10 mA
mA mA
Ron2
N.O.: IF = 10 mA, IL = 200 mA, t 10 ms N.C.: IF = 0 mA, IL = 200 mA, t 10 ms
Turn-on Time
*1
ton (N.O.) ton (N.C.)
IF = 10 mA, VO = 5 V, PW 10 ms
0.5 0.04 0.04 0.5
1.5 0.2 0.2 1.5
ms
Turn-off Time
*1
toff (N.O.) toff (N.C.)
Isolation Resistance Isolation Capacitance
RI-O CI-O
VI-O = 1.0 kVDC V = 0 V, f = 1 MHz
10
9
1.1 pF/ch
4
Data Sheet P13383EJ4V0DS00
PS7122A-1C,PS7122AL-1C
*1 Test Circuit for Switching Time
IF Pulse Input VL
Input monitor Rin RL
VO monitor
N.O. (between pin 5 and 6)
N.C. (between pin 7 and 8)
Input
50 % 0
Input
50 % 0
VO = 5 V Output
90 %
VO = 5 V Output
90 %
10 % ton toff toff ton
10 %
Data Sheet P13383EJ4V0DS00
5
PS7122A-1C,PS7122AL-1C
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
100
Maximum Forward Current IF (mA) Maximum Load Current IL (mA)
MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE
300
80
200
60
40
100
20 0 -25
0
25
50
7580
100
0 -25
0
25
50
75 80
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD VOLTAGE vs. AMBIENT TEMPERATURE
1.6
Output Capacitance Cout (pF)
OUTPUT CAPACITANCE vs. APPLIED VOLTAGE
400 f = 1 MHz
Forward Voltage VF (V)
1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1 mA
300
200 N.C. N.O. 100
1.0
0.8 -25
0
25
50
75
100
0
20
40
60
80
100
120
Ambient Temperature TA (C)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE
10-5
Off-state Leakage Current ILoff (A)
LOAD CURRENT vs. LOAD VOLTAGE
200
IF = 0 mA (N.O.) IF = 10 mA (N.C.)
TA = 80 C N.O., N.C.
Load Current IL (mA)
10-6
100
10-7
-2.0
-1.0
0 -100
1.0
2.0
10-8
25 C N.O., N.C.
-200 10-9 0 50 100 150 200 250 Load Voltage VL (V)
Applied Voltage VD (V)
6
Data Sheet P13383EJ4V0DS00
PS7122A-1C,PS7122AL-1C
TURN-ON TIME vs. FORWARD CURRENT
12 10
Turn-on Time ton (ms)
TURN-OFF TIME vs. FORWARD CURRENT
12 N.C. 10
Turn-off Time toff (ms)
N.O.
VO = 5 V
VO = 5 V
8 6 4 2 N.C. 0 5 10 15 20 25 30
8 6 4 2 N.O. 0 5 10 15 20 25 30
Forward Current IF (mA)
Forward Current IF (mA)
NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE
3.0
Normalized Turn-on Time ton
NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE
3.0
Normalized Turn-off Time toff
2.5 2.0 1.5 1.0 0.5 0.0 -25
Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V
2.5 2.0 1.5 1.0 0.5 0.0 -25
Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V
N.C.
N.O. N.C.
N.O.
0
25
50
75
100
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE
3.0
Normalized On-state Resistance Ron
2.5 2.0 1.5 1.0 0.5 0.0 -25
Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA (N.O.), IF = 0 mA, IL = 10 mA (N.C.)
N.O. N.C.
0
25
50
75
100
Ambient Temperature TA (C)
Data Sheet P13383EJ4V0DS00
7
PS7122A-1C,PS7122AL-1C
ON-STATE RESISTANCE (N.O.) DISTRIBUTION
30 25 n = 50 pcs, IF = 10 mA, IL = 10 mA 30 25 n = 50 pcs, IF = 0 mA, IL = 10 mA
ON-STATE RESISTANCE (N.C.) DISTRIBUTION
Number (pcs)
Number (pcs)
20 15 10 5 0
20 15 10 5 0
4.3
4.4
4.5
4.6
4.7
4.3
4.4
4.5
4.6
4.7
On-state Resistance Ron ()
On-state Resistance Ron ()
TURN-ON TIME (N.O.) DISTRIBUTION
30 25 n = 50 pcs, IF = 10 mA, VO = 5 V
TURN-OFF TIME (N.O.) DISTRIBUTION
30 25 n = 50 pcs, IF = 10 mA, VO = 5 V
Number (pcs)
Number (pcs)
0.4 0.6
20 15 10 5 0
20 15 10 5 0 0.03
0.04
0.05
0.06
Turn-on Time ton (ms)
Turn-off Time toff (ms)
TURN-ON TIME (N.C.) DISTRIBUTION
30 25 n = 50 pcs, IF = 10 mA, VO = 5 V
TURN-OFF TIME (N.C.) DISTRIBUTION
30 25 n = 50 pcs, IF = 10 mA, VO = 5 V
Number (pcs)
Number (pcs)
0.04 0.05
20 15 10 5 0
20 15 10 5 0 0.4 0.6
Turn-on Time ton (ms)
Turn-off Time toff (ms)
Remark The graphs indicate nominal characteristics.
8
Data Sheet P13383EJ4V0DS00
PS7122A-1C,PS7122AL-1C
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.550.1
4.30.2
16.00.3 10.30.1
7.50.1
1.550.1 12.00.1
10.40.1
0.3
Tape Direction
PS7122AL-1C-E3 PS7122AL-1C-E4
Outline and Dimensions (Reel)
1.5
2.00.5 13.00.5
R 1.0
21.00.8
80.05.0
330
16.4 +2.0 -0.0
Packing: 1 000 pcs/reel
Data Sheet P13383EJ4V0DS00
9
PS7122A-1C,PS7122AL-1C
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating)
Time (s)
(2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet P13383EJ4V0DS00
PS7122A-1C,PS7122AL-1C
[MEMO]
Data Sheet P13383EJ4V0DS00
11
PS7122A-1C,PS7122AL-1C
CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of PS7122A-1C

	To Download PS7122A-1C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .